NUMATIK ENGINEERS PVT. LTD.
RO Membrane Cleaning Chemical

RO Membrane Cleaning Chemical

Send Inquiry

RO Membrane Cleaning Chemical

Highly acknowledged for their quality and pureness, the exuberant range of RO Membrane Cleaning Chemicals aid in cleansing the water quality of Raw Water, ETP RO Surface, Bore Well etc.

Our chemicals are widely utilized for treatment purposes as :

Pre-treatment

Antiscalant (General / Specific)

Antioxidant

Antifoulant

RO-cleaner (Inorganic / Organic / Colloidal / Specific)

Preservative

RO Membrane Cleaning Chemical SILICA ANTISCLANT FOR RO

The AQUABLEND-902 has been formulated for treating water containing greater amounts of silica & metal oxides. It guarantees control of silica scales and metal oxide  fouling.

Product Features

  • Allows effective scale control.
  • Eliminate conventional treatment.
  • Maximum recovery.
  • Control deposition of suspended solids.

Dosages - should be dosed in 1-10 ppm (neat).Dosing is done prior to the cartridge filter.

RO Membrane Cleaning Chemicals - R.O. CLEANING CHEMICAL

Our special AQUABLEND-921 would successfully remove metal oxides, sulfate scales, carbonates via a reverse osmosis system.

Product Features

For inverse osmosis system operating on feed water comprising of barium, strontium apart from the common hardness forming salts. Aquablend-921 efficiently removes tough barium sulfate, calcium & strontium scales.

Decreased foam formation & liquid cleaner enables shorter mixing time.

Cost effective.

No harmful effect of working system.

Dosages - should be dosed in 0.5 - 3 % solution in D.M. water.

RO Membrane Cleaning Chemicals - ANTISCLANT FOR R.O High Silica

Our AQUABLEND  901 formulae is created to remove the levels of silica & metal oxides for feed water. This chemical would minimize silica scales & fouling, thus giving a longer performance life.

Product Features

  • Allows effective scale control.
  • Eliminate conventional treatment.
  • Maximum recovery.
  • Control deposition of suspended solids.
  • Dosage - should be dosed in range of 1 -10 ppm ( neat ). Dosing is done prior to the cartridge.